Rotary synchronous table type RT-xx consists of a fixed part (stator), a rotating ring (rotor), an integrated angular contact bearing and an incremental position sensor. The stator contains a group of coils filled with a heat-conducting compound. The rotor consists of a steel ring with glued permanent magnets. Smoothness of movement is achieved due to sinusoidal current switching in the motor windings. The force is transmitted directly through the air gap, i.e. no mechanical transmission. This provides high dynamic and accuracy parameters of the engine, reliability.
- lack of mechanical transmission,
- high accuracy,
- high resolution and smooth movement,
- ease of embedding.
- assembly / transport operations,
- partition tables
- machine tool industry
- lift equipment
RSMR-T-24 Rotary Tables
Low profile table series
RSMR-T-36 Rotary Tables
Ironless Three Phase Synchronous Torque Servo Motor
Low height 22 mm, hollow shaft from 55.5 mm.
The engines are designed for use in industrial automation with a torque of 14 to 900 Nm and a diameter of 145-340 mm
Engines are characterized by low height, high specific and low gear torque, a hollow shaft of 50-230 mm.
The engines are designed for use in industrial automation with a torque of 61 to 10330 nm and a diameter of 350-1232 mm
Engines are characterized by low height, high specific and low gear torque, and a hollow shaft of 205-1087 mm.
Series of tables with external rotor
The dividing table is designed for quick turns in start - stop mode.
The four-point angular contact ball bearing is highly rigid and can be loaded in any direction and any location of the axis of rotation (vertical, horizontal, at an angle, upside down)
Table rotation with a maximum frequency of 1400 rpm is limited by grease and should not last more than 5 seconds, continuous rotation at maximum frequency reduces bearing life.